63mm Full Turbo Rebuild Kit for HE351VE HE300VG Turbos 6.7l Cummins

Part Number: KB-6.7lC-63-FULLKIT
$453.95
Sold out
Rotating Assembly Balancing
Turbo Generation
Share this product with your friends
63mm Full Turbo Rebuild Kit for HE351VE HE300VG Turbos 6.7l Cummins
Product Details

63mm Turbo Front Cover Kit W/ Wheel for HE351VE HE300VG Turbos 6.7l Cummins

Includes:
1x 63mm Front Cover
1x 63mm Billet Compressor Wheel
1x Compressor Backing Plate
1x Compressor V-Band Clamp
Backing Plate Bolts

Turbo Rebuild Kit
10 Blade Turbine Wheel
Seals

Turbo Rebuild Kit Specs:
2 - O-Rings
1 - 360° Thrust Bearing
1 - Thrust Bearing Collar
1 - Thrust Bearing Spacer
2 - Journal Bearings
2- "TS1" Oversized Bearings (HE351VE Kit only)
1 - 12 Point Compressor Wheel Nut
2 - Piston Oil seals
4 - C Clips
1 - Shield
1 - Freeze Plug
3 - Cap Screw Bolts
Rubber Oil Seals
Clamp Nuts


Billet Compressor Specs:
Inducer: 63 mm
Exducer Base: 86 mm
Primary Tip Height: 39 mm
Secondary Tip Height: 28.5mm
Nose Width: 14.8 mm
Blades: 7/7
Pre-balanced
Reinforced Blade Base
Larger Blades for Increased Flow
Increased Throttle Response


10 Blade Turbine Wheel Specs:
Drop in 10 Blade 60x70mm Turbine Wheel & Shaft
Upgraded 10 blade design
Lower EGTs
Increased flow


One Year Warranty Available, the following items will be required:
Receipts of oil supply & drain tubes replaced at time of rebuild
Balancing must be selected at time of purchase
Turbo fasteners must be torqued to specs


Fits: HE351VE HE300VG Turbos on 2007.5-2018 6.7l Cummins Diesel Applications.
Notes: If you have a Cab & Chassis HE300VG turbo please contact us before ordering to make sure you receive the correct backing plate.

Torque Specs:
HE351VE Backing/Seal Plate: 30 in-lbs
HE300VG Backing/Seal Plate: 85 in-lbs
Compressor Wheel Nut: 170 in-lbs - If balanced, align nut and wheel marks.
V-Band Clamps: 150 in-lbs