68mm Front Cover Kit W/ Wheel for 6.0l 2003-2007 Ford PowerstrokeProduct DetailsTurbocharger front cover kit for 2003-2007 6.0l Garrett Turbos.
Lightweight 7/7 Billet Wheel
Increase airflow
Lower EGTs
Raw Aluminum Cover (A/R 0.8)
New Mounting Hardware Included
68mm Inducer: NOT Recommended for Towing & Heavy Hauling
Billet Compressor Specs
Inducer: 68 mm
Exducer Base: 88.25 mm
Extended Tip: 94 mm
Primary Tip Height: 35 mm
Secondary Tip Height: 23 mm
Weight: 153 Grams
Nose Width: 14 mm Hex
Blades: 7/7
Extended Tip
Pre-balanced
Pair it with our 72.5x66.5mm 10 blade turbine wheel and 15mm vanes for a loud whistle! Please see our "complete rebuild kit" listing.
Fits: 2003-2007 F250, F350, F450, F550 and Excursions. Also 2005-2010 E-Series Vans with the 6.0L Powerstroke diesel engine.
We strongly suggest fully rebuilding your turbo (new seals, bearings, oil supply & drain tubes) while you have it out. We only offer warranties on our full rebuild kits.
Turbocharger front cover kit for 2003-2007 6.0l Garrett Turbos.
Lightweight 7/7 Billet Wheel
Increase airflow
Lower EGTs
Raw Aluminum Cover (A/R 0.8)
New Mounting Hardware Included
68mm Inducer: NOT Recommended for Towing & Heavy Hauling
Billet Compressor Specs
Inducer: 68 mm
Exducer Base: 88.25 mm
Extended Tip: 94 mm
Primary Tip Height: 35 mm
Secondary Tip Height: 23 mm
Weight: 153 Grams
Nose Width: 14 mm Hex
Blades: 7/7
Extended Tip
Pre-balanced
Pair it with our 72.5x66.5mm 10 blade turbine wheel and 15mm vanes for a loud whistle! Please see our "complete rebuild kit" listing.
Fits: 2003-2007 F250, F350, F450, F550 and Excursions. Also 2005-2010 E-Series Vans with the 6.0L Powerstroke diesel engine.
We strongly suggest fully rebuilding your turbo (new seals, bearings, oil supply & drain tubes) while you have it out. We only offer warranties on our full rebuild kits.
