63.5mm Front Cover Kit W/ Wheel for 2007-2016 LMM-LML 6.6l Duramax TurbosProduct DetailsTurbocharger front cover kit for LMM-LML Garrett Turbos.
Lightweight 6/6 Billet Wheel
Increase airflow
Lower EGTs
Raw Aluminum Cover
New Mounting Hardware Included
63.5mm Inducer: Recommended for Towing & Heavy Hauling
Billet Compressor Specs
Inducer: 63.5 mm
Exducer Base: 88.4 mm
Extended Tip: 94.1 mm
Primary Tip Height: 58 mm
Secondary Tip Height: 47 mm
Nose Width: 13 mm Hex
Blades: 6/6
Extended Tip
Pre-balanced
Reinforced Blade Base
Slim Nose Increases Blade Size
Larger Blades for Increased Flow
Fits: 2007-2016 LMM / LML 6.6l Duramax Turbos in 2500/3500 applications.
LMM's will need a M10-1.25x10mm plug to plug the sensor port on the front cover
We strongly suggest fully rebuilding your turbo (new seals, bearings, oil supply & drain tubes) while you have it out. We only offer warranties on our full rebuild kits.
Turbocharger front cover kit for LMM-LML Garrett Turbos.
Lightweight 6/6 Billet Wheel
Increase airflow
Lower EGTs
Raw Aluminum Cover
New Mounting Hardware Included
63.5mm Inducer: Recommended for Towing & Heavy Hauling
Billet Compressor Specs
Inducer: 63.5 mm
Exducer Base: 88.4 mm
Extended Tip: 94.1 mm
Primary Tip Height: 58 mm
Secondary Tip Height: 47 mm
Nose Width: 13 mm Hex
Blades: 6/6
Extended Tip
Pre-balanced
Reinforced Blade Base
Slim Nose Increases Blade Size
Larger Blades for Increased Flow
Fits: 2007-2016 LMM / LML 6.6l Duramax Turbos in 2500/3500 applications.
LMM's will need a M10-1.25x10mm plug to plug the sensor port on the front cover
We strongly suggest fully rebuilding your turbo (new seals, bearings, oil supply & drain tubes) while you have it out. We only offer warranties on our full rebuild kits.
